Coleman lantern parts
I have some vintage Coleman lantern parts that are from old models but are new components that I would like to sell. I bought them at a hardware store as part of a large lot when they were cleaning out inventory. Instead of listing on eBay over and over i’ll just hope someone finds this post that needs some of these parts.
I have four of part number 200D1461 (Fuel and air tube for the 220 and 228 D, E, F, H, J & K series Coleman lanterns). They seem to go for $15 on eBay including shipping so i’ll sell for $12 including shipping.
I have 7 of part number 200-1481 the fuel and air tube for the 200, 200A, 202, 242, & 243 series Coleman lanterns. These look very similar to the part pictured above but are shorter as you can see in the image below. They sell for $20 shipped on eBay. I’ll sell mine for $15 each shipped.
I have 2 of 220A172 which is just the direction disc showing the open and close direction. I’ll send these free to anyone that needs them and buys another part from me.
I have 14 push on nuts (242-1071) which list for $1.76 each on the official Coleman parts website plus almost $6 for shipping. I’ll send you three for $6 shipped.
I have 15 ball nuts (part number 203-441 — the threaded nut that holds the top of the lantern onto the globe — the glass part) that i think go for $1.50 on the site plus the $6 shipping charge. I’ll sell two for $6 shipped.
I have 7 of part number 220-5231 the cap and screen used in 220 E, F, H, J, K, 228 F, H, J, 275 and 275 A, 5107 and 5107 A, 5114 A, B, 5179. I’ll sell two for $7 shipped. Coleman sells them for $2.64 plus the $6 shipping charge.
I had two of part number 200-6381 which is the check valve and air stem assembly. $6 each shipped. The Coleman price is $2.20+. SOLD OUT. I’ll keep them on here for others to use the photo if they would like.
I have 8 530A5071 which are the pump clip for the cap. These sell for $1.50+ on the site and I’ll send you two for $6.
I have two 412-3531 tip cleaner stems from the following models of Coleman camp stoves; 413G499, 425D499, 425E499, 425F499, 425F499C, 425F499G, 425F499T and 426D499. This part has been discontinued so i’ll sell them for $15 each shipped.
I have 15 of the jamb nut part number 605-210 which sell for $1.50 plus the $6 shipping. I’ll sell two for $6 shipped. This fits lanterns in the 200, 201, 220, 228, 275, 502, 5114, and 5179 families.
Finally, i have 18 wheel screws. Part number 220B175. These are also discontinued but i’ll send three out for $6 including shipping.
I have a number of burner tubes that i can not identify the part number also. If you need a brass tube with threads on both ends let me know. I have two different sizes.
looking burner cap & screen for model 236 mayor coleman
or a model 237 cap & screen
The long brass tube for 220 lantern which is the burner caps you have the short brass tube is the 200 lantern I have a good supply of the parts you have shown me but please let me know if you get more parts!Thank-you Ryan
David check out http://www.oldtownyucca.com/discus and ask for your parts. I have a 236/237 burner cap, just ask on the board. This board will also help anyone restore a lantern or stove. Lots of good information on Coleman.
I need the type of check valve you have and the stem in the same picture if you still have them
do you have any more 15 dollar valves(tipcleaner)
Do you have any Coleman 220 burner tubes left?
I HAVE A 237 COLEMAN LANTERN WITH NO GLOBE, HANDLE OR VENTILATOR. I DO HAVE A MAROON VENTILATOR BUT HAVE HEARD THAT THIS IS THE WRONG VENTILATOR. WHAT PARTS DO YOU HAVE AND WHAT IS THE LENGTH OF TIME TO RECEIVE THE PARTS. ALSO, CAN YOU GIVE ME AN IDEA OF THE VALUE OF THIS LANTERN? THANK YOU FOR YOUR TIME.
I have a red coleman 200A lantern. There is no pressure when I push in the plunger to pressurize it. What part will I need to fix this?
Rick
Sorry Rick, I’m no expert on how these things work. The people that frequent this forum might be able to help… http://www.oldtownyucca.com/discus
I have a 275….does it burn the standard coleman fuel or white gas??? Thanks LM
Larry – I believe those are the same fuel. I’ve never seen any liquid Coleman fuel that wasn’t white gas.
looking for a air intake tube for a coleman 275. Thanks in advance
Hello,I have a Coleman 502-700 sportster,I need a valve stem assembly (complete),part number 501-5411,would you possibly have one or would you know where I could possibly get one? Thanks Wayne
Interested in two of the generator jamb nuts you list for $6 can send personal check and you can ship after you cash it is that alright
Randy C
When you buy a new generator does the small bolt at the top with the tiny hole come with it?
do you have a filler cap or fuel cap for a coleman lantern model number 242?
I could use part 200-1481 and 220A172, if any are left.
I’m interested in a couple of the cap&screen part no.220-5231.Let me know what you have and we’ll work something out.
If you can send me a phone no. or a private email address to contact you today or a mailling address i can send out a check.I’m afraid it won’t get to you before you leave town though.I don’t want to post my no. on this blog…..thx.Ryan
Interested in 200D1461. Do you have any left?
I,m looking for a air tube with a nut on top with a hole in it, for a model 200A coleman latern. Please let me know if you have one. I,m includeing my e-mail. Thank you
Hi. I need a cap&screen part no.220-5231 (need 1, but 2 would be great) if they are still available. Thanks.
I would like on part number 200D1461 (Fuel and air tube for the 220 and 228 D, E, F, H, J & K series Coleman lanterns). I would also like the ball nuts (part number 203-441). Thanks!
Need Part # 200D1461 for a mod#228E
I need a bail (handle) for a model 285 Coleman Duel Fuel Lantern. Thanks, Jeremy
I think the part number for the bail on the Coleman model 285 is 285-5101
Need air tube part# 220B3221 I think.Also generator # 220E5891.These are for Mod.228F lantern.Thanks.
need advise on rebuilding a mod.228F lantern.Just took the pump assembly out and it was pretty rusty.statement
I would like to buy coleman lantern parts, specifically 200-1481 fuel air tube and 605-210 tip cleaner stem.
I appreciate your help.
Hi, Looking for 201 kerosene burner tube..Its approximate 12,6 mm diameter and 55/56 mm long ( i have not US measures..) Thanks,Janie
I have coleman lantern 2285 and I need 2 generators with the compresion fitting as well can anyone help me out please email me at racquinn@msn.com
I have coleman lantern 228F and I need 2 generators with the compresion fitting as well can anyone help me out please email me at racquinn@msn.com
I have coleman lantern 228-F and I need 2 generators with the compresion fitting as well can anyone help me out please email me at racquinn@msn.com
I need a valve stem or valve stem assy (part no. 237-6531) for a coleman 237 lantern.
I am interestedin a fuel & air tube for a modle 228E lantern I also need the fuel knob and the tube it screws into if you would have them
Sir, I need two globes. A globe for a coleman 275. A globe for an AGM (american gas machine ) Kamplite model LRL 21B. Any ideas? Any ideas for substitution? mark
I NEED A GLOBE FOR A 200 A AND A PUMP FOR A 220 F
I am interested in a fuel and air tube for a 228e
Hi! I have a Coleman 201 kerosene pressure lantern (single mantle) and am looking for either the whole Burner Assembly (part # 201-3701) OR the Burner Cap and Screen (part # 242-3231) and Burner Tube (part # 201-3241). Might you have any of these or any ideas where I could look? I live in Africa and this lantern has served me faithfully for many years, but am having trouble finding parts now. I’m in the States now until 11 Aug. when I return to Africa.
Thanks!
Larry
Hi there,
I have an Coleman 228f lantern, could you please tell me what parts you have left? Thanks!
Regards,
Kevin
I need a 220-5231 cap & screen for a model 5107.
How do I order?
Bruce
Since this first post was made in early 2008 and still has folks looking for Coleman parts, may I suggest oldcolemanparts.com for your repair parts?
Murff, You sure can. But for anyone looking I am still selling the parts above!
Looking for one of the 200-1481 if you still have them
thanks
antonio
Need the part number 200D1461 (fuel and air tube)
Hi – I need 2 of the Ball Nuts 203-441. How do I proceed? Can pay by PayPal or Check or money order.
I bought an old Coleman gas lantern at an auction, it’s really old and bad shape. I do not know the model # it has two mantles and does not have a pump, you have to pressurize the tank and then close the screw in valve. Also it has what’s left of it a globe I think is izing glass. Is there place to get parts & is it Coleman gas or kerosene model?