I have some vintage Coleman lantern parts that are from old models but are new components that I would like to sell. I bought them at a hardware store as part of a large lot when they were cleaning out inventory. Instead of listing on eBay over and over i’ll just hope someone finds this post that needs some of these parts.
I have four of part number 200D1461 (Fuel and air tube for the 220 and 228 D, E, F, H, J & K series Coleman lanterns). They seem to go for $15 on eBay including shipping so i’ll sell for $12 including shipping.
I have 7 of part number 200-1481 the fuel and air tube for the 200, 200A, 202, 242, & 243 series Coleman lanterns. These look very similar to the part pictured above but are shorter as you can see in the image below. They sell for $20 shipped on eBay. I’ll sell mine for $15 each shipped.
I have 2 of 220A172 which is just the direction disc showing the open and close direction. I’ll send these free to anyone that needs them and buys another part from me.
I have 14 push on nuts (242-1071) which list for $1.76 each on the official Coleman parts website plus almost $6 for shipping. I’ll send you three for $6 shipped.
I have 15 ball nuts (part number 203-441 — the threaded nut that holds the top of the lantern onto the globe — the glass part) that i think go for $1.50 on the site plus the $6 shipping charge. I’ll sell two for $6 shipped.
I have 7 of part number 220-5231 the cap and screen used in 220 E, F, H, J, K, 228 F, H, J, 275 and 275 A, 5107 and 5107 A, 5114 A, B, 5179. I’ll sell two for $7 shipped. Coleman sells them for $2.64 plus the $6 shipping charge.
I had two of part number 200-6381 which is the check valve and air stem assembly. $6 each shipped. The Coleman price is $2.20+. SOLD OUT. I’ll keep them on here for others to use the photo if they would like.
I have 8 530A5071 which are the pump clip for the cap. These sell for $1.50+ on the site and I’ll send you two for $6.
I have two 412-3531 tip cleaner stems from the following models of Coleman camp stoves; 413G499, 425D499, 425E499, 425F499, 425F499C, 425F499G, 425F499T and 426D499. This part has been discontinued so i’ll sell them for $15 each shipped.
I have 15 of the jamb nut part number 605-210 which sell for $1.50 plus the $6 shipping. I’ll sell two for $6 shipped. This fits lanterns in the 200, 201, 220, 228, 275, 502, 5114, and 5179 families.
Finally, i have 18 wheel screws. Part number 220B175. These are also discontinued but i’ll send three out for $6 including shipping.
I have a number of burner tubes that i can not identify the part number also. If you need a brass tube with threads on both ends let me know. I have two different sizes.
If you are interested in any of these just leave a comment on this post and put your email address in the field (it will not show to anyone but me) and we can arrange for payment and shipping.
February 18th, 2008 at 7:22 am
looking burner cap & screen for model 236 mayor coleman
or a model 237 cap & screen
February 19th, 2008 at 2:14 pm
The long brass tube for 220 lantern which is the burner caps you have the short brass tube is the 200 lantern I have a good supply of the parts you have shown me but please let me know if you get more parts!Thank-you Ryan
February 22nd, 2008 at 5:50 pm
David check out http://www.oldtownyucca.com/discus and ask for your parts. I have a 236/237 burner cap, just ask on the board. This board will also help anyone restore a lantern or stove. Lots of good information on Coleman.
July 19th, 2008 at 3:14 pm
I need the type of check valve you have and the stem in the same picture if you still have them
July 28th, 2008 at 10:38 pm
do you have any more 15 dollar valves(tipcleaner)
August 4th, 2008 at 5:18 pm
Do you have any Coleman 220 burner tubes left?
August 5th, 2008 at 6:46 am
I HAVE A 237 COLEMAN LANTERN WITH NO GLOBE, HANDLE OR VENTILATOR. I DO HAVE A MAROON VENTILATOR BUT HAVE HEARD THAT THIS IS THE WRONG VENTILATOR. WHAT PARTS DO YOU HAVE AND WHAT IS THE LENGTH OF TIME TO RECEIVE THE PARTS. ALSO, CAN YOU GIVE ME AN IDEA OF THE VALUE OF THIS LANTERN? THANK YOU FOR YOUR TIME.
September 13th, 2008 at 5:19 pm
I have a red coleman 200A lantern. There is no pressure when I push in the plunger to pressurize it. What part will I need to fix this?
Rick
September 13th, 2008 at 7:35 pm
Sorry Rick, I’m no expert on how these things work. The people that frequent this forum might be able to help… http://www.oldtownyucca.com/discus
September 18th, 2008 at 2:17 pm
I have a 275….does it burn the standard coleman fuel or white gas??? Thanks LM
September 19th, 2008 at 10:41 am
Larry – I believe those are the same fuel. I’ve never seen any liquid Coleman fuel that wasn’t white gas.
November 9th, 2008 at 6:52 pm
looking for a air intake tube for a coleman 275. Thanks in advance
December 25th, 2008 at 5:11 am
Hello,I have a Coleman 502-700 sportster,I need a valve stem assembly (complete),part number 501-5411,would you possibly have one or would you know where I could possibly get one? Thanks Wayne
January 11th, 2009 at 2:54 pm
Interested in two of the generator jamb nuts you list for $6 can send personal check and you can ship after you cash it is that alright
Randy C
February 5th, 2009 at 1:18 pm
When you buy a new generator does the small bolt at the top with the tiny hole come with it?
September 2nd, 2009 at 8:22 am
do you have a filler cap or fuel cap for a coleman lantern model number 242?
September 8th, 2009 at 3:40 pm
I could use part 200-1481 and 220A172, if any are left.
September 23rd, 2009 at 8:03 am
I’m interested in a couple of the cap&screen part no.220-5231.Let me know what you have and we’ll work something out.
September 24th, 2009 at 12:46 am
If you can send me a phone no. or a private email address to contact you today or a mailling address i can send out a check.I’m afraid it won’t get to you before you leave town though.I don’t want to post my no. on this blog…..thx.Ryan
October 24th, 2009 at 12:09 pm
Interested in 200D1461. Do you have any left?
November 30th, 2009 at 9:53 am
I,m looking for a air tube with a nut on top with a hole in it, for a model 200A coleman latern. Please let me know if you have one. I,m includeing my e-mail. Thank you
December 21st, 2009 at 1:28 pm
Hi. I need a cap&screen part no.220-5231 (need 1, but 2 would be great) if they are still available. Thanks.
February 28th, 2010 at 11:22 am
I would like on part number 200D1461 (Fuel and air tube for the 220 and 228 D, E, F, H, J & K series Coleman lanterns). I would also like the ball nuts (part number 203-441). Thanks!
March 1st, 2010 at 5:11 pm
Need Part # 200D1461 for a mod#228E
March 5th, 2010 at 2:05 pm
I need a bail (handle) for a model 285 Coleman Duel Fuel Lantern. Thanks, Jeremy
March 5th, 2010 at 2:06 pm
I think the part number for the bail on the Coleman model 285 is 285-5101